• Categories Cloud
    This will be shown to users with no Flash or Javascript.
  • Directory Statistics
    • Active Links: 110832
    • Todays Links: 28
    • Active Articles: 4129
    • Todays Articles: 18

Trusted Site Seal

Error. Page cannot be displayed. Please contact your service provider for more details. (19)


Free Directory SubmitArticle Details

Buffalo Radial Fans

Date Added: October 22, 2012 03:03:56 PM
Author: Oleg Tchetchel
Category: Business & Economy

Standard Buffalo Fan radial fan accessories include: flash or raised access door, inspection port, drain and plug, unitary base, shaft and bearing guard, belt guard, motor cover, spring vibration isolation, rubber-in-share (RIS) vibration isolation, vibrating pads, outlet damper, inlet vane damper, external inlet vane damper, evase, electrical / pneumatic actuators. Buffalo Fan Radial Fans (industrial radial blade blowers) are supplied in welded heavy gauge steel construction to prevent flexing at high pressure. Radial Fans are available in direct drive arrangements 4 / 4V / 4H / 7 / 8 and belt drive arrangements 1 / 3 / 9 / 9S / 9T./ 9H. Buffalo radial fans can be in single width single inlet (SWSI), or double width double inlet (DWDI). Capacities: to 500,000 CFM. Static pressure up to 100 inches water gauge depending on the class of construction. Typical class of construction is Class 1, 2, 3, 4, 5. Aluminum wheel, Steel wheel, or Alloy wheels ob Buffalo Fan Canada radial blowers are available too: industrial radial blowers and fans are supplied with aluminum wheel or corten wheel to meet requirements of AMCA A, and AMCA B spark resistant construction. Mild steel wheels are of all welded construction. They are used on pressure applications, material handling applications (plastic scrap, paper trim, granular material, low density bulk material) where wheel is reinforced with support gussets, or made of abraision resistant construction, or furnished of high strenght steel. Stainless steel wheel in 304 SS, 316 SS, 316 SS, 2205 SS are supplied for corrosive applications, or high temeparature applications. The pressure curve remains stable from fully open to fully closed position. Heat fan construction can be furnished for up to 1000 F oprtation and includes high temperature paint (up to 1000 F), special alloy construction, shaft cooler, shaft-cooler guard, and steel wheel, or alloy wheel, with steel, or alloy housing. Shaft seal and low leakage construction for demanding low-leakage applications can be furnished with shaftss straightened to close tolerance to minimize "run-out" and ensure smooth operation. Teflon shaft seal, ceramic shaft seal and lubricated shaft seals (Buna, Teflon, Viton) are standard. Red silicone gasketing is provided for low leakage construction and for high temperature construction. Heavy-duty spherical roller bearings are standard. Cladding for sound attenuation and silencers for low-noise installations consists of 2 inches mineral-wool insulation covered with a welded steel jacket. As an inexpensive alternative is offered slide-on acoustic cloth jackets. Inlet silencer/outlet silencer are supplied with matching flanges for further attenuation of the noise level. At this juncture it is prudent to reiterate that a fan running at a particular speed can have an infinite number of operating points all along its characteristic curve. The fan will interact with the system to produce an operating point at the intersection of the system curve and the fan curve. Note that it is the system in which the fan is installed that will determine the operating point on the fan curve. Thus it is vitally important that the system designer accurately determine the system losses in order to ensure that the actual air flow rate is as close as possible to the design air flow rate. Oleg Tchetchel Canadian Process Design Engineer Buffalo Fan Co. http://buffalofan.com/inquiry.html http://www.buffalofan.com/faninquiry.html
 
Ratings Average rating: (0 votes)
Comments

No Comments Yet.


Visual Confirmation Security Code

*Enter the code shown:  

  • Help
  • Featured Website
  • Natural Skin Care - Expederm
  • Twitter Ticker
    Twitter icon

    My tweets

    Loading..
  • Latest Links
  • Latest Articles
    Rudimentary Criteria In Roofing Described
    Examining Systems Of Roofing, The Options For Root Criteria For Roofing, Compared - Roofing Solutions, Thinking About Core Factors For Roofing